CHERRY MX SPEED RGB Silver
Fastest CHERRY MX RGB Switch, ideal for gaming, as well as for frequent and fast typists
Further perspectives:
Data sheet:
- 40% faster than the CHERRY MX Standard switch
- High-precision mechanical switch for extremely short reaction times and high switching frequencies
- MX switch variant optimised for use with SMD LEDs (RGB or single colour)
- More consistent lighting throughout the keycap due to optimised, transparent casing and scattering surface including lens.
- Option to use all 16.7 million RGB colours in high luminosity (scope of supply does not include LED)
- SMD LEDs directly mounted on the circuit board for cost-efficient, fully automated production
- World exclusive CHERRY Gold Crosspoint technology
- Precision "Made in Germany" with low bounce time
- Self-cleaning contacts, resistant to dust and dirt
- Guaranteed over 50 million keystrokes per switch with no loss of quality
- Long-lasting safe switching performance in the renowned "Original CHERRY quality" tried-and-tested a billion times over.
- SPEED RGB Silver Switch: No pressure points, light, linear actuation - switching function at a defined force of approx. 45 cN without contact feedback
Housing colour:
- Transparent cover, plain base
Warranty:
- 2 years
Keymodule:
- Switch type: MX
- Protection class: IP40
- Operation characteristics:
- Fastening: Product dependant, see table "Models"
- Switching voltage: 12 V AC/DC max.
- Switching current: 10 mA AC/DC max.
- Dielectric strength: 500 V / 50Hz
- Durability: > 50 million actuations
- Contact configuration: Single-pole contact
- Actuator travel: 3.4 -0.4 mm
- Pretravel: 1.2 ± 0.4 mm
- Initial force: 30 cN min.
- Actuation force: 45 ± 15 cN
- Bounce time: < 5 ms (during actuation with 0,4 m/s)
- Standard lead spacing: 19.05 mm (16 mm min.)
- Lighting: SMD LED can be mounted directly on the circuit board (not included in the module), opening for SMD LED in the base.
- Decoupling diode: no
- Wire jumper: no
- Insulation materials: Thermoplastics (min.UL 94 HB)
- Spring: Stainless steel
- Contacts: High-quality gold alloy
- Storage Temperature: -20°C to 60°C
- Operating Temperature: 0°C to 50°C
- Humidity: Storage: average <50% max. 3 months / 75% max. 15 days, operation: 5% to 95% without condensation
Models:
| Order number: | Fastening: |
|---|---|
| MX1A-51NA |
Snap fastening in frame |
| MX1A-51NB |
Fixing pins in the printed circuit board |
Hilfe-und-Support
Passendes-Zubehoer
